ePCO Ground Bonding PigTailSEPCO's website

 

Insulated Solid Wire

  EPCO ground bonding pigtails are made in the USA

  Complies with the American Recovery and
   Reinvestment Act -  Buy American Provision

  Widely used in metal box applications

  Features a captive GSH or GSC green ground screw
   on one end, the other end is pre-stripped 1"

  Available in 6½", 8", 10", and 12" lengths

  Typical Applications:
        Ground bonding in a power distribution box, junction box,
           or multi-gang receptacle box(s)

        When a standard stranded wire PigTail with spade and/or
           ring terminal is not required

 

 

 

The following Ground Screw types are used in EPCO Ground Bonding PigTails:

  GSC – Cutting Point Screw: Combination hex head, slotted, phillips and square
    drive screw. Use in metal boxes when hoes have not been pre-tapped.

  GSH – Hex Head Screw: Combination slotted, phillips and square drive tapered
    point screw. Use when pre-tapped holes exist in metal boxes.

 

Ground Bonding PigTails - Insulated Solid Wire
Catalog & UPC Number	Description
20009	6½" PigTail (12 AWG) with captive GSH ground screw, stripped 1"
20010	6½" PigTail (14 AWG) with captive GSH ground screw, stripped 1"
20011	8" PigTail (12 AWG) with captive GSH ground screw, stripped 1"
20016	6½" PigTail (12 AWG) with captive GSC ground screw, stripped 1"
20086	8" PigTail (12 AWG) with captive GSC ground screw, stripped 1"
20087	10" PigTail (12 AWG) with captive GSH ground screw, stripped 1"
20088	10" PigTail (12 AWG) with captive GSc ground screw, stripped 1"
20089	12" PigTail (12 AWG) with captive GSH ground screw, stripped 1"
20090	12" PigTail (12 AWG) with captive GSC ground screw, stripped 1"
20091	8" PigTail (14 AWG) with captive GSH ground screw

   

 

Single and Dual-Gang Ground Bonding PigTails

  EPCO ground bonding pigtails are made in the USA

  Complies with the American Recovery and
   Reinvestment Act -  Buy American Provision

  Used in commercial and industrial applications to
   ground devices in single and multi-gang metal boxes

  Precise machine tooling and matched flanged spade
   and ring terminals ensure a safe, reliable ground connection

  Flanged spade and ring terminals meet the requirements of the
   2008 NEC, Article 110.14(A)

 

 

 

 

 

The following Ground Screw types are used in EPCO Ground Bonding PigTails:

  GSC – Cutting Point Screw: Combination hex head, slotted, phillips and square
   drive screw. Use in metal boxes when holes have not been pre-tapped.

  GSH – Hex Head Screw: Combination slotted, phillips and square drive tapered
   point screw. Use when pre-tapped holes exist in metal boxes.

 

Single and Dual Gang Ground Bonding PigTails
20067	Single-gang PigTail with 8" solid-wire incoming lead
20068	Single-gang PigTail with 8" stranded-wire incoming lead
20070	Dual-Gang stranded PigTails with 8" wire conductors
20074	Dual-gang PigTail with 8" solid-wire incoming lead
20075	Dual-gang PigTail with 8" stranded-wire incoming lead

    

 

Epco has several products. Only selected products are featured here. For information on additional Epco products please check Epco's website or request information from ESA.