Epco Splice Kits / Heat Shrink Tubing EPCO's website

 

UF Cable Splice Kit (UFC2B)

  UL Listed

  Obsoletes messy, two part splice
   kits

  Designed to simplify splicing UF cable

  600 volt maximum, 105°C rating

  Accommodates UF Cable sizes: 14/3 without ground minimum,
   8/3 without ground maximum

  Meets the requirements of the 2008 NEC Code 110.14(B)

  Through the use of thick wall heat shrink tubing with sealant and
   the connector, the repair of UF cable is a quick, easy and reliable
   process

  This UL listed system eliminates epoxies, tape or separate mastics
   to create a direct burial splice

  Includes one 4-position connector and one piece of heat shrink
   tubing designed to splice and insulate 14 to 8 AWG UF cable

 

UF Cable Splice Kit
Catalog Number	UPC Number	Description
UFC2B	10711	UF Direct burial splice kit

     

 

UF Stretcher Kit (UFS-2)

  UL Listed for direct burial

  Includes one 11½" connector that
   eliminates the need to use two
   connectors and a short piece of
   cable when repairing damaged UF
   cable

  600 volt maximum, 150°C rating

 

  Accommodates UF cable sizes: 14/3 without ground (minimum),
   8/3 without ground (maximum)

  Meets the requirements of the 2002 NEC Code 110-14(b)

  Simplify UF cable repairs after a trencher has damaged or destroyed
   a 7” to 10” section of UF cable

  Eliminates epoxies, tapes or separate mastics and creates a
   waterproof, fully submersible splice

 

UF Stretcher Kit
Catalog Number	UPC Number	Description
UFS-2	10714	UF Stretcher kit (1.10" diameter)

        

 

 

Bulk Thick Wall Heat Shrink Tubing (UFS-2)

  UL Listed

  Installs and shrinks easily

  Most effective when insulating over large transitions

  3:1 Shrink ratios enables wider cable range and fewer
   tubing sizes

  Excellent abrasion, corrosion and environmental 
   resistance properties

  UV and fungi resistant

  Used to dielectrically insulate and encapsulate
   electrical connections

  Internal coating has an adhesive and sealant that
   melts when the tubing is heated to provide a
   moisture and soil resistant seal

  Same quality tubing as EPCO's popular packaged HST
   thick wall tubing

  Bulk tubing is available in cut lengths from 2” up to 48”

 

 

Specify the length by adding the correct length in inches to
the end of the part number. Example: One 13” piece of 14-10 AWG tubing is E00-920-013.

 

Bulk Thick Wall Heat Shrink Tubing
Catalog Number	UPC Number	Description
E00-901-0__	14002	Thick Wall Tubing 2-4/0
E00-902-0__	14000	Thick Wall Tubing 14-10 AWG
E00-903-0__	14001	Thick Wall Tubing 8-1 AW
E00-904-0__	14003	Thick Wall Tubing 1/0-400 MCM
E00-905-0__	14004	Thick Wall Tubing 250-600 MCM

     in 48" length only

 

Heat Shrink Torch (HST-T1)

  Recommended for shrinking Thick
   Wall Heat Shrink Tubing and Splice
   Kits

  The trigger-start ignition starts
   fast and easy

  Features a fully adjustable
   regulator valve and air inlet port
   for appropriate flame settings

  Connect directly to a standard 14.1 propane tank (available locally)

 

Heat Shrink Torch
Catalog Number	UPC Number	Description
HST-T1	12200	Heat Shrink Torch

     in 48" length only

 

Epco has several products. Only selected products are featured here. For information on additional Epco products please check Epco's website or request information from ESA.