
Royal Mountie Single Gang Boxes
Suitable for wet locations
Available with or without attached swivel lugs
2.75" x 4.5" x 2" deep
Heavy duty die-cast aluminum, .094" thick, with powder finish
For use in all indoor and outdoor damp or wet locations, with all
standard FS,
outlet, lampholder or splice box covers
Ground screw and 2 close-up plugs supplied with each box
Pre-tapped ground screw hole![]()
UL Listed and CSA approved
Comply with Federal Specification AA-50563

One Gang Deep Boxes
Suitable for wet locations
Come with detachable lugs, 2 close-up plugs and self-tapping ground
screw
2.75" x 4.5" x 2.625" deep
Heavy duty die-cast aluminum, .094" thick, with powder finish
Ground screw hole is in bottom of box
Pre-tapped ground screw hole![]()
UL Listed and CSA Approved
Comply with Federal Specification AA-50563

Two Gang Lug Boxes
Suitable for wet locations
Come with detachable lugs, 2 close-up plugs, and self-tapping ground
screw
4.5" x 4.5" x 2" deep
Heavy duty die-cast aluminum, .094" thick, with powder finish
For use in all indoor and outdoor damp or wet locations, with all
standard FS,
outlet, lampholder or splice box covers![]()
UL Listed and CSA Approved
Comply with Federal Specification AA-50563

Two Gang Deep Boxes
Suitable for wet locations
Come with detachable lugs, 2 close-up plugs, and self-tapping ground
screw
4.5" x 4.5" x 2.625" deep
Heavy duty die-cast aluminum, .094" thick, with powder finish![]()
UL Listed and CSA Approved
Box
Extensions
Suitable for wet
locations
Fit all universal-type
weatherproof boxes
Heavy duty die-cast
aluminum, .094" thick,
with powder finish
Gasket and mounting screws included![]()
UL Listed and CSA Approved
Meet all applicable Federal specifications
Swimming
Pool Junction Boxes
UL Listed; meet NEC
Article 680 requirements
Solid brass base and
specially formulated
gasket
Lexan 503® nonconductive, watertight cover, UV-stabilized
Bonding wire pressure connector on one grounding post complies with
Article
110-14(a) of the 1978 NEC
Four grounding posts (green screws)![]()
Continuous sealing ridge keeps interior dry
Four brass mounting screws; hardware included
Mulberry has several products. Only selected products are featured here. For information on additional Mulberry products please check Mulberry Metal Products' website or request information from ESA.
Ph: 206-574-0092 * Fax: 206-575-0674 * repesa@repesa.com

