QMark - Cabinet Unit HeatersBerko's website

Cabinet Unit Heaters (CU900)

  Used in offices, stores, schools,
   churches, hospitals, dormitories,
   airport terminals, reception rooms,
   entrance lobbies, corridors and
   stairways

  Basic cabinet can be mounted on
   the ceiling, floor or wall

  Heaters can be mounted on the
   surface, full recessed or semi-recessed

  Heater can be mounted for air discharge up or down or with the heater mounted
   on end the air can be discharged either left or right, to provide an air door affect

  Cabinet constructed of heavy 16 gauge cold-rolled steel structurally formed to
   provide strength and rigidity for normal heavy wear and usage

  Cabinet is finished in neutral grey epoxy (decorator colors optional)

  19 capacities - 2kW to 32kW; 5 cabinet styles - 35", 45", 58", 68" and 78" lengths
   (26-3/8" height x 9-3/4" deep)

  1/8 hp, PSC, motors are two-speed (1550/1450 rpm)

  Motors are resilient mounted with automatic thermal overload protection

  Motor fuse protection is provided on all heaters to meet UL, cUL and NEC
   requirements

  Plate fin element - steel fins are copper brazed to low watt density, steel-sheathed
   tubular heating elements (80/20NiCh resistance wire). Element is finished with
   aluminized paint for corrosion resistance. Fins and elements are arranged in a
   uniform grid pattern and fit closely into the discharge area to assure that all
   outgoing air passes through the heating element.

  Thermal safety cutout - installed in direct contact with the heating element.
   Automatically shuts off the heater in the event of overheating due to any cause
  and reactivates the heater when operating temperature returns to normal

  Built-in thermostat - single pole, snap-action thermostat with remote bulb sensor
   located directly in the air intake. (Optional - built-in two stage thermostat available)
   Easy and low cost field installation of a completely packaged heater.

  Automatic fan delay eliminates cold drafts on start-up and
   discharge residual heat from the heater body during shut down

  Many options available

  Fan only option

 

Berko has several products. Only selected products are featured here. For information on additional Berko products please check Berko's website or request information from ESA.